Hydraulic
Accessories
Pump-Mounted Manifolds
Specifications:
Product Type:
Manifolds and Fittings
Pump mounted manifold enables the use of remote mounted accessories and valves.
Torque Wrench Hose:
- Polyrethane covering. 3/8″ NPTF fittings on both ends
- Leakage factor of less than 50 microampere
- Orange polyurethane for easy identification
- Covering is not perforated, preventing moisture from entering the hose and affecting its overall conductivity
- Hoses feature a minimum 40,000 psi (276 bar) burst pressure
Specifications
| Order Number |
Description |
|---|---|
| 9626 | Pump mounted manifold block – Converts pumps with pump mounted valves for use with remote mounted valves. This manifold block is subplate mounted on the pump cover plate and provides 3/8″ NPTF pressure and return ports. Maximum recommended flow rate is 19 liter/min.
Note: If used on PE30 or PG30 series pump, 12.7 mm longer mounting screws are required. Order four (4) No. 11956 screws separately. |
