Puller
Male-Female Threaded Adapter
Specifications:
Product Type:
Puller Accessories
These adapters are used on ends of Push-Puller legs
The male-female threaded adapter is used on ends of Push-Puller® legs, with forcing screws or slide hammers to assist in pulling shafts, bearing caps, pinions, and many other parts.
CAUTION: All the items shown may not withstand the full tonnage of the pullers they may be used with.
Specifications
| Order Number |
Female End | Male End | Length (mm) |
|---|---|---|---|
| 8000 | 5/8″–18 | 1/4”–20 | 57.2 |
| 8001 | 5/8″–18 | 5/16″–18 | 57.2 |
| 8002 | 5/8″–18 | 7/16″–14 | 57.2 |
| 8003 | 5/8″–18 | 7/16″–20 | 57.2 |
| 8004 | 5/8″–18 | 3/8″–24 | 57.2 |
| 8005 | 5/8″–18 | 3/8″–16 | 57.2 |
| 8006 | 5/8″–18 | 1/2″–20 | 57.2 |
| 8007 | 5/8″–18 | 1/2″–13 | 57.2 |
| 8008 | 5/8″–18 | 9/16″–18 | 57.2 |
| 8009 | 5/8″–18 | 9/16″–12 | 57.2 |
| 8010 | 5/8″–18 | 5/8″–11 | 57.2 |
| 8011 | 1″–14 | 5/16″–11 | 63.5 |
| 8012 | 1″–14 | 5/8″–18 | 81 |
| 8013 | 5/8″–18 | 3/4″–16 | 57.2 |
| 8014 | 1″–14 | 3/4″-16 | 63.5 |
| 8015 | 5/8″–18 | 3/4″–10 | 57.2 |
| 8016 | 1″–14 | 3/4″–10 | 63.5 |
| 8017 | 5/8″–18 | 7/8″–14 | 57.2 |
| 8018 | 5/8″–18 | 7/8″–9 | 57.2 |
| 8019 | 5/8″–18 | 1″–14 | 57.2 |
| 8020 | 1″–8 | 5/8″–18 | 76.2 |
| 8021 | 1″–8 | 1″–14 | 76.2 |
| 8022 | 5/8″–18 | 1/8″ pipe | 57.2 |
| 8023 | 1 1/4″–12 | 1″–14 | 114.3 |
| 8024 | 1 1/4″–12 | 1 3/4″–12 | 114.3 |
| 8025 | 1 1/4″–7 | 5/8″–18 | 101.6 |
| 8027 | 1 1/4″–7 | 1″–14 | 101.6 |
| 8028 | 1 5/8″–5 1/2 | 1″–8 | 101.6 |
| 8029 | 1 5/8″–5 1/2 | 1″–14 | 101.6 |
| Note: Order Numbers 8000–8029 – each sold individually. Federal Specification: GGG-P-00781-D |
|||
