• Accurately measure oil flow, pressure and temperature on in-plant equipment, forklifts, machine tools and more
• Temperature and flow readings are in Metric and English, accurate to within ±2% of full scale
• Dual pressure gauges for high and low pressure readings; low pressure gauge is automatically shut off and protected as pressure rises beyond its maximum reading
• Automatic pressure compensating feature lets you increase flow without affecting pressure setting
• Reverse flow through tester will not cause damage; replaceable safety disc ruptures if pressure exceeds upper limit
• Solid state voltage regulator eliminates errors caused by voltage change during testing

50 GPM (200 l/min) IN-LINE HYDRAULIC TESTERS

• Troubleshoots systems with capacities to 200 gpm (750 l/min) at pressures less than 5,000 psi (350 bar). Accurately measure oil flow to ±5%, pressure to within 2% and temperature readings within 1%
• Pressure gauge is liquid filled to dampen system pulsation

For more precise low pressure readings, an optional dual pressure gauge kit is available.

Testing the Pump: Operator runs engine at a specific rpm and adjusts tester’s pressure compensating valve to simulate a work load. By comparing meter readings with manufacturer specs, proper operation of pump can be confirmed. If oil flow and pressure do not meet Specifications, the pump is faulty, Or, if test results and specifications agree, the operator will know that the problem is elsewhere in the system and that the other tests must be performed. Regardless of the component being tested, Hook-up and testing is accomplished in minutes.

Note: These hydraulic testers should always be used with the owner’s manual/manufacture’s specification for the system under the test.