Pumps
PE18: Electric Portable
Specifications:
Product Type:
Double-acting pumps, electric driven, single-acting pumps
18 cu. in./min (295 cu cm/min): Vanguard Jr.® Series ideal for use with small hydraulically powered tools up to 55 Ton
IDEAL FOR USE WITH SMALL HYDRAULICALLY POWERED TOOLS.
- Vanguard Jr.® pumps provide two-speed high performance in a light-weight, compact package.
- Gauge port provided on pump. Metal reservoir on all models.
- Equipped with a 1⁄2 hp (0.37 kW), 115 volt, 60/50 Hz single phase motor that starts under load, even at reduced voltage.
- Low amperage draw permits use with smaller generators and low amperage circuits.
- All pumps have a 10 foot (3 m) remote control (PE183C has 25 foot (7,6 m) remote control).
- CSA rated for intermittent duty. Noise level of 85-90 dBA.
For operating hydraulic crimping, cutting or other tools:
- No. PE183C – For crimping or pressing applications. Has special electrical circuitry to pulse/advance, hold at full pressure, build to a predetermined pressure, release and reset circuit. Features separate emergency return switch.
- No. PE184C – Allows you to alternately operate a spring-return cutting and/or crimping tool without disconnecting either tool. Select port connection with manual 4-way valve, start pump with remote control hand switch and extend connected tool. When hand switch is switched to off, pump stops and automatic valve opens, allowing tool to return. In center (neutral) position, manual control valve holds tool in position at time valve is shifted.
Specifications
| Order Number |
For use with Cylinder Type |
Description | Valve Type |
Valve Function | Control Switch †† | Motor | Reservoir Usable (l) |
|---|---|---|---|---|---|---|---|
| PE182 | Single-Acting | Base model pump has 0.37 kW pump with 2-Way valve and 1.9 liter reservoir. |
2-Way | Advance Return† |
Remote Motor Control (3.1 m) on/off |
0.37 kW, 110/115VAC** 50/60 Hz, A.C., Single Phase |
1.7 |
| PE183 | Single-Acting | PE182, except has 3-way valve. | 3-Way | Advance Hold Return |
Remote Motor Control (3.1 m) on/off |
0.37 kW, 110/115VAC** 50/60 Hz, A.C., Single Phase |
1.7 |
| PE183-2 | Single-Acting | PE183, except has 9.5 liter reservoir. | 3-Way | Advance Hold Return |
Remote Control (3.1 m) |
0.37 kW, 110/115VAC** 50/60 Hz, A.C., Single Phase |
8.4 †† |
| PE183A∞ | Single-Acting | PE183, except has “dump valve”. | Auto./ Dump Pump |
Advance Return |
Remote (3.1 m) |
0.37 kW, 110/115VAC** 50/60 Hz, A.C., Single Phase |
1.7 |
| PE183C∞ | Single-Acting | Special crimping pump. | Special, for crimping only |
Advance Hold Return† |
Remote Motor Control (7.6 m) on/off |
0.37 kW, 110/115VAC** 50/60 Hz, A.C., Single Phase |
1.7 |
| PE184 | Single-Acting/ Double-Acting |
Base model pump has 0.37 kW pump for double-acting systems with 1.9 liter reservoir. |
4-Way | Advance Hold Return |
Remote Motor Control (3.1 m) on/off |
0.37 kW, 110/115VAC** 50/60 Hz, A.C., Single Phase |
1.7 |
| PE184-2 | Single-Acting/ Double-Acting |
PE184, except with 9.5 liter reservoir. | 4-Way | Advance Hold Return† |
Remote Motor Control (3.1 m) on/off |
0.37 kW, 110/115VAC** 50/60 Hz, A.C., Single Phase |
8.4 †† |
| PE184C* | Single-Acting/ Double-Acting |
Special crimping pump. | 4-Way | Advance Return |
Remote Control (3.1 m) on/off |
0.37 kW, 110/115VAC** 50/60 Hz, A.C., Single Phase |
1.7 |
| * Also for use with special single-acting cylinder applications. ** Available with 220 Volt, 60/50 Hz motor (to order, place suffix “50-220” behind pump order number). Specify voltage when ordering. † Holds when motor is shut off and valve is in “advance” position. †† Pumps supplied with 7.6 l oil (usable oil is 5.7 l), will hold 9.5 l when filled to within 13 mm below reservoir cover plate. ∞ Not to be used for lifting. |
|||||||
