Shop Equipments
Shop Presses: H Frame Open Throat 25 Ton
Specifications:
Product Type:
H Frame
Design permits use as both H frame and C frame press
OPEN THROAT® PRESSES
- Cylinder can be mounted on frame extension to handle jobs which won’t fit between uprights.
- Open Throat® press models are also available with remote control to enable the operator to view work from all sides with fingertip control of cylinder piston travel.
- Off-center pressing loads of full capacity can be applied across entire width of frame.
- Press bed height easily adjustable with winch. Bed will not drop when handle is released.
- Choice of power sources for rapid cylinder advance: two-speed hydraulic hand pump, electric/hydraulic or air/hydraulic.
Specifications
OPEN THROAT® Presses:
| Order Number |
Capacity (tons) |
Type of Cylinder Used |
Stroke (mm) |
Cylinder Model |
Speed (mm./min.)††† | Type Pump |
Valve Type |
Pump Model † |
Weight (kg) |
|
|---|---|---|---|---|---|---|---|---|---|---|
| Advance | Pressing | |||||||||
| SPA2514 | 25 | Single-Acting | 362 | C2514C | 249 | 30 | Air | 2-Way Foot | PA6 | 309 |
| SPM2514 | 25 | Single-Acting | 362 | C2514C | 12.4 mm/stroke | 0.8 mm/stroke | Hand | Load-Release | P159 | 314 |
| SPE2514 | 25 | Single-Acting | 362 | C2514C | 1,184 | 84 | Electric | 2-Way†† | PE172-E220 | 301 |
| SPE2514S | 25 | Single-Acting | 362 | C2514C | 1,321 | 102 | Electric | 3-Way† | PE172S-E220 | 344 |
| SPE2514DS | 25 | Double-Acting | 362 | RD2514 | 1,321 | 102 | Electric | 4-Way† | PE174-E220 | 357 |
| † Solenoid valve with 12 volt remote control hand switch. †† Holds pressure with motor shut off. Also has an automatic dump setting. Furnished with a 3.1 meter remote motor control. ††† Typical performance based on 7 bar and 700 bar pump specifications. Actual speeds may vary under operating conditions. ‡ Pump standard with press. Other Power Team pumps can be substituted. dBA at idle and 700 bari: PE172–67/81 dBA; PE21–70 dBA measured at 0.9 meter distance, all sides. |
||||||||||
PUMP ELECTRICAL SPECIFICATIONS
PE17 Series – 1/2 hp, 115 volt, 60 cycle, single phase.
PE21 Series – 1 hp, 115 volt, 60 cycle, single phase. Both pumps available in 230 volt, 50 cycle, add suffix “-220” to order no.
